next up previous contents index
Next: Exercises Up: Examples Previous: Analog-style sequencer   Contents   Index

MIDI-style synthesizer

Patch C10.monophonic.synth.pd (figure 3.16) also implements a monophonic, note-oriented synthesizer, but in this case oriented toward MIDI controllability. Here the tasks of envelope generation and sequencing pitches is handled using control streams instead of audio signals. Several new control objects are needed for this example.

Figure 3.16: A MIDI-style monophonic synthesizer.
\begin{figure}\psfig{file=figs/fig03.16.ps}\end{figure}


\fbox{ $\mathrm{notein}$}: MIDI note input. Three outlets present the pitch, velocity, and channel of incoming MIDI note-on and note-off events (with note-off events appearing as velocity-zero note-on events.) The outlets appear in Pd's customary right-to-left order.


\fbox{ $\mathrm{stripnote}$}: filter out note-off messages. This passes (pitch, velocity) pairs through whenever the velocity is nonzero, dropping the others. Unlike $\mathrm{notein}$, $\mathrm{stripnote}$ does not input or output actual MIDI messages.


\fbox{ $\mathrm{trigger}$},
\fbox{ $\mathrm{t}$}: copy a message to outlets in right to left order, with type conversion. The creation arguments (``b" and ``f" in this example) specify two outlets, one giving bang messages, the other float (i.e., numbers). One outlet is created for each creation argument. Other types are ``l" for list, ``s" for symbol, and ``a" to output anything (i.e., a copy of the input message, whatever it is). The incoming message is converted (as faithfully as possible) into whatever format is specified by the creation argument. Although the outputs appear in Pd's standard right-to-left order, no time elapses between each of the outputs; they are deterministically ordered and yet instantaneous.

The patch's control objects feed frequencies to the $\mathrm{phasor}\sim$ object whenever a note-on message is received. Controlling the amplitude (via the $\mathrm{line}\sim$ object) is more difficult. When a note-on message is received, the ``sel 0" object outputs the velocity at right (because the input failed to match 0); this is divided by the maximum MIDI velocity of 127 and packed into a message for $\mathrm{line}\sim$ with a time of 100 msec.

However, when a note-off is received, it is only appropriate to stop the sound if the note-off pitch actually matches the pitch the instrument is playing. For example, suppose the messages received are ``60 127", ``72 127", ``60 0", and ``72 0". When the note-on at pitch 72 arrives the pitch should change to 72, and then the ``60 0" message should be ignored, with the note playing until the ``72 0" message.

To accomplish this, first we store the velocity in the upper $\mathrm{float}$ object. Second, when the pitch arrives, it too is stored (the lower $\mathrm{float}$ object) and then the velocity is tested against zero (the bang outlet of ``t b f" recalls the velocity which is sent to ``sel 0"). If this is zero, the second step is to recall the pitch and test it (the $\mathrm{select}$ object) against the most recently received note-on pitch. Only if these are equal (so that bang appears at the left-hand-side outlet of select) does the message 0 1000 go to the line~ object.


next up previous contents index
Next: Exercises Up: Examples Previous: Analog-style sequencer   Contents   Index
Miller Puckette 2005-02-21