
Next: Examples Up: Modulation Previous:
Waveshaping Contents
Index
Frequency and phase modulation
If a sinusoid is given a frequency which varies
slowly in time we hear it as having a varying pitch. But if the
pitch changes so quickly that our ears can't track the change--for
instance, if the change itself occurs at or above the fundamental
frequency of the sinusoid--we hear a timbral change. The timbres so
generated are rich and widely varying. The discovery by John
Chowning of this possibility [Cho73] revolutionized the field of
computer music. Here we develop frequency
modulation, usually called FM, as a special case of
waveshaping [Leb79]; the
treatment here is adapted from an earlier publication [Puc01].
The FM technique, in its simplest form, is shown
in figure 5.8 part (a). A
frequency-modulated sinusoid is one whose frequency varies
sinusoidally, at some angular frequency
, about
a central frequency
, so that the
instantaneous frequencies vary between
and
, with parameters
controlling the frequency of variation, and
controlling the depth of variation. The
parameters
,
, and
are called the carrier frequency, the modulation frequency, and the index of modulation, respectively.
It is customary to use a simpler, essentially
equivalent formulation in which the phase, instead of the
frequency, of the carrier sinusoid is modulated sinusoidally. (This
gives an equivalent result since the instantaneous frequency is
just the change of phase, and since the sample-to-sample change in
a sinusoid is just another sinusoid.) The phase modulation
formulation is shown in part (b) of the figure. If the carrier and
modulation frequencies don't themselves vary in time, the resulting
signal can be written as
The parameter
, which takes the
place of the earlier parameter
, is also called the
index of mosulation; it too controls the extent of frequency
variation relative to the carrier frequency
.
If
, there is no frequency variation and the
expression reduces to the unmodified, carrier sinusoid:
Figure 5.8: Block diagram
for frequency modulation (FM) synthesis: (a) the classic form; (b)
realized as phase modulation.
 |
To analyse the resulting spectrum we can
write,
so we can consider it as a sum of two waveshaping
generators, each operating on a sinusoid of frequency
and with a waveshaping index
, and each
ring modulated with a sinusoid of frequency
.
The waveshaping function
is given by
for the first term and by
for the second.
Returning to Figure 5.4, we can see at a glance what the
spectrum will look like. The two harmonic spectra, of the
waveshaping outputs
and
have, respectively, harmonics tuned to
and
and each is multiplied by a sinusoid at the carrier
frequency. So there will be a spectrum centered at the carrier
frequency
, with sidebands at both even and
odd multiples of the modulation frequency
,
contributed respectively by the sine and cosine waveshaping terms
above. The index of modulation
, as it changes,
controls the relative strength of the various partials. The
partials themselves are situated at the frequencies
where
As with any situation where two periodic signals
are multiplied, if there is some common supermultiple of the two
periods, the resulting product will repeat at that longer period.
So if the two periods are
and
, where
and
are relatively prime, they both repeat
after a time interval of
. In other words, if the
two have frequencies which are both multiples of some common
frequency, so that
and
, again with
and
relatively prime, the result will repeat at
a frequency of the common submultiple
. On the
other hand, of no common submultiple
can be
found, or if the only submultiples are lower than any discernable
pitch, then the result will be inharmonic.
Much more about FM can be found in textbooks
[Moo90, p. 316] [DJ85] [Bou00] and research publications;
some of the possibilities are shown in the following
examples.

Next: Examples Up: Modulation Previous:
Waveshaping Contents
Index
Miller Puckette 2005-04-01