next up previous contents index
Next: Stretching the unit circle Up: Designing filters Previous: Peaking and stop-band filter   Contents   Index

Butterworth filters

A filter with one real pole and one real zero can be configured as a shelving filter, as a high-pass filter (putting the zero at the point $1$) or as a low-pass filter (putting the zero at $-1$). The frequency responses of these filters are quite blunt; in other words, the transition regions are wide. It is often desirable to get a sharper filter, either shelving, low- or high-pass, whose two bands are flatter and separated by a narrower transition region.

A procedure borrowed from the analog filtering world transforms real, one-pole, one-zero filters to corresponding Butterworth filters, which have narrower transition regions. This procedure is described clearly and elegantly in the last chapter of [Ste96]. The derivation uses more mathematics background than we have developed here, and we will simply present the result without deriving it.

To make a Butterworth filter out of a high-pass, low-pass, or shelving filter, suppose that either the pole or the zero is given by the expression

\begin{displaymath}
{{1 - {r^2}} \over {{(1 + r)}^2}}
\end{displaymath}

where $r$ is a parameter ranging from 1 to $\infty$. If $r=0$ this is the point $1$, and if $r=\infty$ it's $-1$.

Then, for reasons which will remain mysterious, we replace the point (whether pole or zero) by $n$ points given by:

\begin{displaymath}
{ (1 - {r^2}) - (2 r \sin(\alpha)) i }
\over
{ 1 + {r^2} + 2 r \cos(\alpha))}
\end{displaymath}

where $\alpha $ ranges over the values:

\begin{displaymath}
{\pi \over 2} ({1 \over n} - 1) , \;
{\pi \over 2} ({3 \ov...
...} - 1) , \; \ldots , \;
{\pi \over 2} ({{2n-1} \over n} - 1)
\end{displaymath}

In other words, $\alpha $ takes on $n$ equally spaced angles between $-\pi/2$ and $\pi /2$. The points are arranged in the complex plane as shown in Figure 8.17. They lie on a circle through the original real-valued point, which cuts the unit circle at right angles.

A good estimate for the cutoff or transition frequency defined by these circular collections of poles or zeros is simply the spot where the circle intersects the unit circle, corresponding to $\alpha = \pi/2$. This gives the point

\begin{displaymath}
{ (1 - {r^2}) - 2 r i }
\over
{ 1 + {r^2} }
\end{displaymath}

which, after some algebra, gives an angular frequency equal to

\begin{displaymath}
\beta = 2 \arctan (r)
\end{displaymath}

Figure 8.17: Replacing a real-valued pole or zero (shown as a solid dot) with an array of four of them (circles) as for a Butterworth filter. In this example we get four new poles or zeros as shown, lying along the circle where $r=0.5$.
\begin{figure}\psfig{file=figs/fig08.17.ps}\end{figure}

Figure 8.18 (part a) shows a pole-zero diagram and frequency response for a Butterworth low-pass filter with three poles and three zeros. Part (b) shows the frequency response of the low-pass filter and three other filters obtained by choosing different values of $\beta $ (and hence $r$) for the zeros, while leaving the poles stationary. As the zeros progress from $\beta =\pi $ to $\beta =0$, the filter, which starts as a low-pass filter, becomes a shelving filter and then a high-pass one.

Figure 8.18: Butterworth low-pass filter with three poles and three zeros: (a) pole-zero plot. The poles are chosen for a cutoff frequency $\beta = \pi /4$; (b) frequency responses for four filters with the same pole configuration, with different placements of zeros (but leaving the poles fixed). The low-pass filter results from setting $\beta =\pi $ for the zeros; the two shelving filters correspond to $\beta =3\pi /10$ and $\beta =2\pi /10$, and finally the high-pass filter is obtained setting $\beta =0$. The high-pass filter is normalized for unit gain at the Nyquist frequency, and the others for unit gain at DC.
\begin{figure}\psfig{file=figs/fig08.18.ps}\end{figure}


next up previous contents index
Next: Stretching the unit circle Up: Designing filters Previous: Peaking and stop-band filter   Contents   Index
Miller Puckette 2006-09-24