next up previous contents index
Next: Envelope followers Up: Examples Previous: Prefabricated low-, high-, and   Contents   Index

Prefabricated time-variable band-pass filter

Time-varying band-pass filtering, as often used in classical subtractive synthesis (section 8.4.1), can be done using the vcf~ object, introduced here.


\fbox{ \texttt{vcf\~}} (``voltage controlled filter"): a band-pass filter, similar to bp~, but with a signal inlet to control center frequency. Both bp~ and vcf~ are one-pole resonant filters as developed in section [*]; bp~ outputs only the real part of the resulting signal, while vcf~ outputs the real and imaginary parts separately.

Figure 8.29: The vcf~ band-pass filter, with its center frequency controlled by an audio signal (as compared to bp~ which takes only control messages to set its center frequency.
\begin{figure}\psfig{file=figs/fig08.29.ps}\end{figure}

Patch H04.filter.sweep.pd ()Figure 8.29) demonstrates using the vcf~ object for a simple and characteristic subtractive synthesis task. A phasor~ object (at top) creates a sawtooth wave to filter. (This is not especially good practice as we are not controlling the possibility of foldover; a better sawtooth generator for this purpose will be developed in Chapter 10.) The second phasor~ object (labeled ``LFO for sweep") controls the time-varying center frequency. After adjusting to set the depth and a base center frequency (given in MIDI units), the result is converted into Hertz (using the tabread4~ object) and passed to vcf~ to set its center frequency. Another example of using a vcf~ object for subtractive synthesis is demonstrated in Patch H05.filter.floyd.pd.


next up previous contents index
Next: Envelope followers Up: Examples Previous: Prefabricated low-, high-, and   Contents   Index
Miller Puckette 2005-04-01